Absolute velocity
Measure motion of the machine housing at the mounting position.
PR9268-301-100 is an Emerson self-powered electrodynamic velocity sensor for absolute machine-case vibration measurement. This horizontal configuration uses 5 m armored cable with an open cable end.
Emerson’s PR9268 order matrix defines measurement direction, cable option and cable end. The fixed final 00 positions are retained in the complete model and are not assigned an additional feature meaning.
Expand the groups for configuration and measurement data.
Official PR9268 velocity-sensor specifications and ordering reference.
Emerson’s PR9268 specifications sheet includes the measurement-direction, cable-length and termination options used by this configuration. It is a series reference rather than an individual-unit calibration certificate.
OPEN OFFICIAL SERIES PDFSend the complete model, quantity, and your technical or purchasing question.
Reference: Emerson PR9268 Specifications Sheet, December 2024, pp.1–5; PR9268 Installation Guide MHM-97479, Rev 3.11, October 2026, Table 3-2 and Sections 4 and 6.
Emerson PR9268 PR9268 uses an electrodynamic moving-coil system to measure absolute case vibration. Mechanical motion generates the signal without a separate sensor power supply.
Measure motion of the machine housing at the mounting position.
Moving-coil motion generates a velocity-proportional electrical signal.
Use the specified mounting direction and 5 m armored open-end cable.
A clear workflow for sourcing, verification, shipment preparation, delivery and product assurance.
Include the complete part number, quantity and delivery destination.